Home Theater Setup
A home theater is mostly a wiring and settings problem. I get every source into the receiver, every speaker on the right channel and in phase, and the picture and sound handshaking so one remote turns the whole thing on.
No deposit. Pay when it's done. Or call John on (619) 928-6500.
What's included
- Receiver or soundbar placed, powered, and connected to the TV
- Sources connected and labelled — streaming box, console, disc player, turntable
- Speakers positioned, wired to the correct channels, and checked for polarity
- Room calibration run if your receiver has it, then adjusted by ear
- Picture and audio settings matched so HDR and surround actually pass through
- One-button power on tested end to end
- Cables bundled and routed out of sight
What I'll need from you
- The receiver or soundbar, speakers, and speaker wire
- The sources you want connected, and any account logins they need
- Enough outlets nearby — a power strip is fine
- How long it takes
- Two to three hours depending on how many speakers.
John
Everyone says the box has been there a week. It's been a month.
Can you run speaker wire inside the walls?
Low-voltage speaker wire, yes — that's my in-wall cable running job and it's priced separately. Anything carrying line voltage isn't something I touch.
Do I need a receiver, or is a soundbar enough?
For most living rooms a good soundbar with a separate sub gets you 80% of the way for a fraction of the fuss. Text me the room dimensions and what you watch and I'll tell you straight.
My sound cuts out when I switch inputs.
Almost always an HDMI handshake problem — cable rating, ARC settings, or the order things power on in. That's the kind of thing this job fixes.
TV & Entertainment
Often booked at the same visit
Adding a second job to the same trip is the cheapest way to buy my time — the drive only gets paid for once.
Home theater installation in San Diego
Home theater installation in San Diego is shaped by how homes here are built: open plans, high ceilings, hard floors, and a lot of glass facing the afternoon. Those rooms sound bright and reflective, which is why a system that measured well in the shop can feel harsh in a Carmel Valley great room. Placement and calibration do more for that than spending another few hundred dollars on the receiver, and I would rather move a speaker three feet than sell you an upgrade.
The failures I get called for are almost always handshake problems rather than broken equipment — sound dropping when you switch inputs, HDR not passing through, the soundbar going silent after a power cut. Those come down to cable ratings, ARC settings and the order things power on in, and they are fixable in an afternoon. I get every source in, set the picture and audio so the hardware actually delivers what you paid for, and leave you able to turn it all on with one button.
Send a photo of the spot. I'll confirm $179.
If the photo shows something that changes the price, you'll know before I drive out — not after.
Would rather type it out? Ask for a price here.